When you're applying Watco Teak Oil Finish, I'd say starting with 2 to 3 coats is a pretty solid plan for good coverage and protection.
But keep in mind, the number of coats might vary depending on the wood type and its condition. If you're working with something like teak, which is pretty dense, you might need a few extra coats to get it fully absorbed and protected.
The manufacturer mentions this oil is great for denser woods like teak, rosewood, and mahogany, and it's durable for both indoor and outdoor use.
It stands up well against UV rays and moisture, which is super handy if you're using it for something like outdoor furniture or marine projects (as long as it's above the waterline).
Based on what we've found, folks who have used it on outdoor furniture often say it does a good job restoring that like-new look and is easy to apply.
Someone even mentioned that their teak furniture had a warm, rich glow after using it, which reflects how well the oil seeps into the wood, according to the manufacturer.
Just a heads up: this oil won't drastically change the natural color of the wood. Some people have noted that while it provides a nice clear protective finish, it still keeps the wood looking pretty much like it did originally.
And for safety, this stuff does contain VOCs, so make sure you're applying it in a well-ventilated area or outside.
It's smart to wear gloves and maybe a mask to avoid breathing in any fumes.
So, yeah, start with 2 to 3 coats and see how the wood's taking it in. If it needs more, go ahead and add another coat or two.
Just remember to apply it safely and in a ventilated space.
